fgc 45 model. it starts and idles ok. when warmed up it has to be coaxed to keep running then it works ok. If I turn off the key or it stalls,...

Hello and welcome to ExpertHelp.com! My name is Charles Totherow and I'm going to do everything in my power to answer your question to your full satisfaction!

I’m available to chat now. Please let me know that you are ready by posting a response. I’ll leave my chat session open for the next 15 minutes or so and wait for your reply. If I don’t catch you this time, please respond with a few times (including your timezone) that work best for you and we can connect then.

If your forklift will not restart after the truck has been running, check for a faulty lock off solenoid. Remove the fuel line from the LPG tank, and relieve the fuel pressure in the fuel line.

Caution: LPG is extremely cold, so protect your skin and eyes.

After the pressure has been released, fully couple the connector to the tank. You will want to try and start the truck before re-pressurizing the system, and when it starts open the tank valve fully. As an alternate solution, you could open the tank valve after setting the key to the run position. The key indicator of a faulty LP lock-off, is when this valve needs to open before it sees pressure, in order for the truck to start. At this point try to start the truck. If the truck starts and runs, then the LPG lock off solenoid located on top of the EPR, has failed. The lock off solenoid will need to be replaced if this occurs

Please let me know if there is anything else I can help you with?

Please let me know if there is anything else I can help you with?