ExpertHelpExpertHelp
Checking sign-in status…
Computer Lessons

How to Sync Bitty Boomers Speakers with Google Home and Alexa Show 5?

Asked Jul 13, 20213 views1 answer
I have a question about Bitty Boomers speakers. Can I sync them with devices like Google Home or the Alexa Show 5? I need help understanding the compatibility and the steps required to connect them.

Syncing Bitty Boomers Speakers with Google Home and Alexa Show 5

If you have Bitty Boomers speakers and are wondering how to sync them with devices like Google Home or the Alexa Show 5, you're in the right place. Below, we’ll cover compatibility, step-by-step instructions for pairing, and common troubleshooting tips to help you get set up quickly.

Compatibility

Bitty Boomers speakers are Bluetooth-enabled, which means they can connect wirelessly to a variety of devices, including:

  • Google Home
  • Amazon Echo Show 5

Both of these smart devices support Bluetooth audio streaming, allowing you to play music and other audio through your Bitty Boomers.

Step-by-Step Instructions

Pairing Bitty Boomers with Google Home

  1. Power On Your Bitty Boomers Speaker

    • Press and hold the POWER Button for 3 seconds.
    • A blue LED light will light up and then flash quickly, indicating that the speaker is in pairing mode.

  2. Open the Google Home App

    • Make sure your smartphone or tablet is connected to the same Wi-Fi network as your Google Home.

  3. Access Bluetooth Settings

    • Tap on the Devices icon in the top right corner.
    • Select your Google Home device.
    • Tap on the Settings gear icon.
    • Scroll down to Paired Bluetooth devices and select it.

  4. Pair Your Speaker

    • In the Bluetooth settings, tap on Pair Bluetooth Device.
    • Look for your Bitty Boomers speaker in the list of available devices and select it.
    • You should hear a tone when the pairing is successful.

Pairing Bitty Boomers with Alexa Show 5

  1. Power On Your Bitty Boomers Speaker

    • Press and hold the POWER Button for 3 seconds.
    • Wait for the blue LED light to flash quickly.

  2. Open the Alexa App

    • Ensure your smartphone is connected to the same Wi-Fi network as your Alexa Show 5.

  3. Access Bluetooth Settings

    • Tap on the Devices tab located on the bottom menu.
    • Select Echo & Alexa and choose your Alexa Show 5.

  4. Pair Your Speaker

    • Tap on Bluetooth Devices.
    • Choose Pair a New Device.
    • Look for your Bitty Boomers speaker in the list and select it.
    • A confirmation tone will indicate a successful connection.

Pairing Two Bitty Boomers Speakers

If you want to enhance your audio experience, you can pair two Bitty Boomers speakers for a stereo sound effect. Here’s how:

  1. Power On Both Speakers

    • Turn on the first Bitty Boomers speaker by pressing the POWER Button for 3 seconds.
    • Turn on the second speaker in the same way.

  2. Initiate Pairing Mode on the Second Speaker

    • Double-click the POWER Button on the second speaker until you hear a chirp sound.

  3. Connect the Speakers

    • The first speaker will emit a short connect sound indicating they are pairing together.
    • If you do not hear this sound, double-click the POWER Button on the first speaker.

  4. Pair with Your Device

    • On your device’s Bluetooth menu, locate and select the name of the paired speakers (e.g., “Bitty Boomers” or similar).
    • Once connected, you'll enjoy audio output from both speakers.

Troubleshooting Common Issues

  • Speaker Not Entering Pairing Mode: Ensure the speaker is charged. If it beeps when you press the power button, it may need charging.

  • Device Cannot Find Speaker: Make sure the speaker is in pairing mode (LED flashing). Check that your device’s Bluetooth is enabled and that it’s within range (typically within 30 feet).

  • Audio Quality Issues: If you experience audio lag or poor sound quality, ensure there are no obstructions between the devices and that you are not too far away from the speakers. Try moving the devices closer to each other.

  • Connection Drops: If the connection drops frequently, consider resetting the speaker by turning it off and back on again, then re-pairing it with your device.

Conclusion

Syncing your Bitty Boomers speakers with devices like Google Home and Alexa Show 5 is straightforward. By following the steps outlined above, you can enjoy your favorite music and audio content in an enhanced audio setup. If you encounter any issues, refer to the troubleshooting section for quick fixes.

Feel free to reach out if you have more questions or need further assistance!

Expert Answers
CT
Charles Totherow
Answered Jul 13, 2021
✓ Accepted
To sync your Bitty Boomer speakers, you'll first want to make sure they are powered on. Press the POWER button for about three seconds until you hear a beeping sound, which indicates that the speaker may need to be charged. Once powered on, a blue LED light will flash quickly, signaling that the speaker is in pairing mode. Next, go to your device’s Bluetooth settings and look for “Bitty Boomer.” Select it, and you should hear a tone confirming that the pairing is complete. If you want to pair two Bitty Boomers together, ensure that no other speakers are connected to your device. Power on the first speaker, then power on the second speaker by double-clicking the POWER button. You should hear a chirp sound, followed by a connection tone from the first speaker. If you don’t hear the connection sound, double-click the POWER button on the first speaker again. After this, go back to your device’s Bluetooth menu and select “Bitty Boomer” to connect to both speakers. This should allow you to enjoy audio from both speakers simultaneously. If you run into any issues during this process, feel free to reach out for further assistance.

Still need help?

Connect with verified experts who can solve your problem today.

Ask a QuestionFind an Expert