GE Profile Range: Model J28918SEL1SS, Ser. # ML203645P After Self cleaning Locked light remains on. Door will open but light remains on. Hit...

Hello and welcome to ExpertHelp.com! My name is Charles Totherow and I'm going to do everything in my power to answer your question to your full satisfaction!

Before we get started, I want to remind you ExpertHelp.com is an independent professional support company. We are not associated with General Electric nor are we paid to provide support on their behalf. However, we have helped hundreds of customers with similar questions and believe we can help you too. OK, let’s get started! :)

I’m available to chat now. Please let me know that you are ready by posting a response. I’ll leave my chat session open for the next 15 minutes or so and wait for your reply. If I don’t catch you this time, please respond with a few times (including your timezone) that work best for you and we can connect then.

Please try this:  Open the oven door all the way, then holding the button where the door hits when you close the door, start a self clean cycle, do not let go of the button, after about 2 minutes cancel the self clean cycle, when the lock light goes out then release the button you have been holding all this time, let me know if this works.

Please let me know if this solved the problem

I called and left a message with my number where you can back to me at your convienience

I was hoping for the cheap and easy, you have a bad micro switch inside the door lock and the entire motor assemble will need to be replaced, this is part number WB26K5030, You can order the parts you need from the following places, http://www.apwagner.com/, http://www.repairclinic.com/, or http://www.partstore.com/, all of these places offer easy returns and reasonable prices for their items.

If my memory serves me correctly you may need to pull it out about 2 inches and remove the console to install the new unit.

Areyou getting any beeps from the unit?